Skip to content

Wavefront measurement of sports optics with superior accuracy

Wavefront measurement solutions for imaging quality testing and alignment, chromatic effects, focal length, field curvature, etc.

Wavefront measurement of sports optics with superior accuracy

Wavefront measurement of sports optics with superior accuracy is an application documented by Optocraft. This page summarizes the engineering task and the system-selection considerations for an Elina implementation.

Application challenge

Wavefront measurement solutions for imaging quality testing and alignment, chromatic effects, focal length, field curvature, etc.

Measurement or test approach

The optical system uses wavefront sensing and application-specific optics or illumination to quantify optical quality, alignment or laser-beam characteristics.

Topics covered by the manufacturer

  • Comprehensive characterization of binoculars and spotting scopes
  • Accurate inspection of eyepieces and objective lens
  • Our solution for the inspection of sports optics

Information required for system selection

Define aperture, wavelength, wavefront range, spatial resolution, required accuracy, test geometry and software interface.

Official Optocraft source

The problem

Wavefront measurement solutions for imaging quality testing and alignment, chromatic effects, focal length, field curvature, etc.

The method

The optical system uses wavefront sensing and application-specific optics or illumination to quantify optical quality, alignment or laser-beam characteristics.

The result

The delivered configuration must be verified against the operating envelope and performance required by the application.

Frequently asked questions

Answers to the most common questions about our products and services

Application details are available from the manufacturer's official source: https://www.optocraft.de/en/optics/sports-optics/

Before configuring a system, define the measured quantities, operating ranges, tolerances and required measurement rate, along with environmental conditions, installation constraints and system interfaces.

Didn't find the answer you were looking for?

Talk to an expert

More information

Contact us

Tell us what you need to measure and an engineer will get back to you.

Send us a message

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words