scanCONTROL 2900
scanCONTROL 2900: sensors and measurement devices by Micro-Epsilon for measurement & 3d systems.
Measurement solutions for Industrial automation
Applications
-
3D workpiece digitization in automated machining
Detect workpiece position and shape directly inside a processing machine. scanCONTROL profile scanners combined with OpenSCAN software digitize workpieces for machine integration.
-
Brüel & Kjær Vibro delivers limitless asset health management with BKV Beyond ®
DARMSTADT, Germany (April 24, 2023) – Brüel & Kjær Vibro (B&K Vibro), one of the leading worldwide independent suppliers of condition monitoring
-
Colour and material identification of screw nuts
Distinguish screw nuts by color and material in automated production. A color measurement system detects color nuances and material differences for sorting.
-
Crane-boom extension and position monitoring
Monitor boom length and position to calculate load torque and help prevent collisions. A wireSENSOR WPS-K100 draw-wire sensor measures extension; a customer-supplied encoder can evaluate the signal. Depending on variant and customer…
-
Cylinder-lift measurement in a barrel pump
Measure the decreasing lift of a hydraulic cylinder pressing material from a barrel. A wireSENSOR WDS-P60 draw-wire sensor measures cylinder lift through its potentiometer output and transfers the analog signal to a controller.
-
Electrical Powertrain Testing
Testing of drives and power trains is a key task in vehicle development. Especially in view of the required substantial increases in efficiency next-generation cars and large utility vehicles need to offer, it is essential that every motor…
-
Explore our products and solutions
This application addresses explore our products and solutions in an industrial measurement or test workflow.
-
Explore our products and solutions
Qlar helps in the production of a wide range of solutions and materials essential to infrastructure. Learn more.
-
Explore our products and solutions
Qlar provides you with extruders and other equipment for the efficient and safe production of performance materials. Rely on quality & learn more.
-
Fabric-web edge detection in a cutting machine
Detect the fabric roll start and position before cutting to prevent faulty cuts and missing control signals. An optoCONTROL CLS-K-31 fiber-optic sensor mounted on a cutting blade detects the fabric position and sends a PNP switching signal…
-
Food & Beverage
The food and beverage industry is evolving fast. Robotic farming, vertical integration, and intelligent packaging is reshaping the sector, while sustainability, automation, and digitalisation continue to drive transformation from production…
-
HM The HM series universal balancing machines from Schenck are ideal for balancing horizontally mounted rotors with maximum precision and flexibility for many areas of individual applications. Their modular design enables these machines to meet most balancing requirements in single-unit or in high volume production making them suitable for smaller businesses and workshops and for manufacturers of larger quantities.
Highly precise and flexibly adaptable: horizontal balancing machines based on a modular design from the market leader.
-
Industrial Automation
Industrial automation promises higher output, better quality and safer operations, but performance depends on the quality of the measurement data behind it. Unstable or inconsistent data disrupts process control, causing scrap, rework…
-
Industry Solutions
This application addresses industry solutions in an industrial measurement or test workflow.
-
INSIGHT: Facility & Asset Management
ISO 9001 and ISO 17025 compliance made simple with INSIGHT Facility & Asset Management—streamline audits, monitoring, and quality documentation.
-
IO-Link Interface for Smart Sensors
IO-Link enables smart, connected manufacturing with full data transparency, remote setup, and real-time monitoring—boosting productivity, cutting manual work, and simplifying automation through one flexible, cost-saving three-wire…
-
Measurement of adhesive application on tapes and plasters
Check the amount or profile of adhesive applied to tapes, plasters and bandages. Laser measurement is used to inspect the applied adhesive layer.
-
Mineral-wool thickness control before milling
Measure mineral-wool web thickness before milling to optimize pre-thickness and reduce production waste. Two optoNCDT laser sensors measure two tracks; ILR2250 laser distance sensors are used where safety requires a larger standoff…
-
Powering Productivity with Automation
Automation is building a better world by bringing the physical and virtual realms together. Freeing people from repetitive, unsafe, or lower-value processes by combining machinery with digital technology. In this transformation, companies…
-
Presence detection of small parts
Detect whether small components are present in an automated process. A non-contact optical sensor detects the component presence and provides a switching signal.
-
Product Finder Find the perfect balancing and diagnostic device – tailored to your requirements
Use the Schenck Product Finder to quickly identify the ideal balancing machine, diagnostic system or measuring solution for your application. Filter by rotor type, rotor weight, industry and automation level to discover the best balancing…
-
Reduce your CO2 footprint with precise and stable feeding
This application addresses reduce your co2 footprint with precise and stable feeding in an industrial measurement or test workflow.
-
Software
HORIBA Software STARS delivers automation, data management, and asset optimization for efficient, real-time mobility testing.
-
Speaker Testing
The end user has strong and clear ideas of the performance expected from a product, so it is crucial to transform these expectations into products that satisfy customers. Sound quality measurements help to ensure that customer preferences…
-
Vertical alignment monitoring of high-bay warehouse racks
Detect deviations in the vertical alignment of high-bay warehouse racks before they disrupt automated storage or retrieval. INC5701 inclination sensors continuously monitor rack stability near the upper third; analog outputs or RS485 with…
Related products
-
-
optoNCDT 1750
optoNCDT 1750: sensors and measurement devices by Micro-Epsilon for laser triangulation.
-
-
Contact us
Tell us what you need to measure and an engineer will get back to you.
Send us a message
- Address 29 Hametzuda St., Azur Industrial Zone Azur 5800173, Israel · POB 11475
- Phone 03-5590277
- Email sales@elinatech.com
- Opening hours Sun–Thu, 08:30–18:00