ILR1171-125
Measuring ranges by target type
White target with 80% reflectance: measuring distance 0.2–125 m; net measuring span 124.8 m.
With ILR-RF250 reflector film measuring 250 × 250 mm: measuring distance 0.5–270 m; net span 269.5 m. Reflector operation is a separate target condition.
The achievable range depends on target reflectance, ambient light and atmospheric conditions. Source: Micro-Epsilon English International specifications.
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 124800 mm |
|---|---|
| Start of measuring range | 200 mm |
| Linearity | 60000 µm |
| Repeatability | 25000 µm |
| Resolution | 1000 µm |
| Measuring rate | 40000 Hz |
| Interfaces | rs422 |
| interface_specification | 4-20mA |
| Operating temperature | -40–60 °C |
| Protection class (DIN EN 60529) | ip67 |
| Interfaces | rs232 |
| interface_specification | RS422 / RS485 |
| interface_specification | Analog 0-10V |
| Interfaces | ethernet |
| Contact | Non-contact |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
The specified range ends are 70 m for black targets at 10% reflectivity, 100 m for grey at 40%, and 125 m for white at 80%. The start is 0.2 m, giving a 124.8 m net span on white. With reflector film the interval is 0.5–270 m. Ambient light and atmospheric conditions also affect usable range.
No. The table lists linearity below ±60 mm and repeatability below 25 mm. The manufacturer specifies ±100 mm linearity and ±50 mm repeatability at distances up to and including 1 m and from 70 m inclusive. The smaller errors must not be applied to the entire measuring interval.
The specified measuring rate is 40 kHz and the resolution is 1 mm. Rate describes measurements over time, while resolution describes distance-value discrimination. A 1 mm resolution does not establish 1 mm linearity or accuracy.
The specification lists RS232 and RS422, a scalable 4–20 mA analogue output, and configurable switching outputs. Supply and signals use a 12-pin M12 connection. Cable or adapter selection must match the model and pin assignment, rather than the connector name alone.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product