ILR3800-100
Measuring ranges by target type
White target with 80% reflectance: measuring distance 0.05–100 m; net measuring span 99.95 m.
With a suitable reflector film: measuring distance 35–150 m; net span 115 m. The reflector minimum distance differs from the minimum for a white target.
Range depends on target reflectance and measurement conditions. The 150 m endpoint is not a net span. Source: Micro-Epsilon English International specifications.
Technical specification
Every engineering figure, laid out to scan quickly
| Measuring range | 99950 mm |
|---|---|
| Linearity | 1000 µm |
| Repeatability | 300 µm |
| Resolution | 100 µm |
| Measuring rate | 20 Hz |
| Interfaces | profinet |
| interface_specification | RS422 / RS485 |
| quantity_specification | 0.05 to 100 m measuring range |
| Interfaces | rs422 |
| Interfaces | ethernet |
| Interfaces | ethernet_ip |
| Interfaces | usb |
| Contact | Non-contact |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
Without a reflector the start is 0.05 m. Range ends are 30 m for black at 6% reflectivity, 70 m for grey at 40%, and 100 m for white at 80%, giving net spans of 29.95, 69.95 and 99.95 m respectively. With reflector film the interval is 35–150 m: a 115 m net span with a different start distance.
The cited specification does not establish that. Linearity below ±1 mm was measured over 0.05–20 m with a statistical spread of 2σ. It must not automatically be extended to the full white-target or reflector range.
The manufacturer specifies repeatability below 300 µm at a measuring frequency of 20 Hz with a moving average of 10 values. It is not a rating for one unaveraged reading. Preserve the averaging condition when assessing dynamic measurements.
No. The connection diagram separates RS422 from paths using USB and Industrial Ethernet adapters. USB, PROFINET or EtherNet/IP require an appropriate interface module and cable. ILR3800-100-IO is a separate IO-Link variant and must not be treated as the base model.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product