Skip to content

optoNCDT 1320 Laser triangulation

optoNCDT 1320: sensors and measurement devices by Micro-Epsilon for laser triangulation.

Request a quote for this product Schedule a demonstration Talk to an expert
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)
Official Micro-Epsilon product image

Shared technical specifications for the series

Properties every model in the series has. What differs is in the models table below.

Range across models

The span covered by the models of the series together — not the range of each model.

Range across the models of optoNCDT 1320
Linearity 10–200 µm
Repeatability 1–50 µm
Start of measuring range 20–100 mm
End of measuring range 30–600 mm
rate_option 250–4000 Hz
Measuring range 10–500 mm
Light spot width X 0.045–0.71 mm
Light spot width Y 0.05–0.91 mm
Request a quote for this product

Models in the series

One column per model: what differs between the models of the series.

Models of optoNCDT 1320 compared by parameter
Parameter ILD1320-10 eli-m-7651abb303d2baa394dde6dd ILD1320-100 eli-m-897b4d8c921f36ceacf2307a ILD1320-200 eli-m-df8861412924623cb22295d7 ILD1320-25 eli-m-9d837eff40485c6d72fd44c9 ILD1320-50 eli-m-6a8aa8b80ddfd4c5462729c2 ILD1320-500 eli-m-bd0f49ecec68c344fc3ba548
Resolution 1 µm 1 µm 1 µm 1 µm 1 µm 1 µm
Linearity 10 µm 100 µm 200 µm 25 µm 50 µm Not specified
Repeatability 1 µm 10 µm 20 µm 2.5 µm 5 µm 50 µm
Operating temperature 0–50 °C 0–50 °C 0–50 °C 0–50 °C 0–50 °C 0–50 °C
Start of measuring range 20 mm 50 mm 60 mm 25 mm 35 mm 100 mm
Protection class (DIN EN 60529) ip67 ip67 ip67 ip67 ip67 ip67
Interfaces profinet ethernet rs422 profinet ethernet profinet
End of measuring range 30 mm 150 mm 260 mm 50 mm 85 mm 600 mm
rate_option 4000 Hz 4000 Hz 250 Hz 250 Hz 1000 Hz 250 Hz
Measuring range 10 mm 100 mm 200 mm 25 mm 50 mm 500 mm
Measuring rate 4000 Hz 4000 Hz 4000 Hz 4000 Hz 4000 Hz 4000 Hz
interface_specification Analog 0-10V Analog 0-10V Analog 0-10V Analog 0-10V RS422 / RS485 Analog 0-10V
Contact Non-contact Non-contact Non-contact Non-contact Non-contact Non-contact
Light spot size at mid of measuring range 45 × 50 µm 710 × 910 µm 710 × 910 µm 55 × 60 µm Not specified Not specified
Light spot width X 0.045 mm 0.71 mm 0.71 mm 0.055 mm 0.07000000000000001 mm 0.71 mm
Light spot width Y 0.05 mm 0.91 mm 0.91 mm 0.06 mm 0.095 mm 0.91 mm
ADC sampling rate 4000 samples/s 4000 samples/s 4000 samples/s 4000 samples/s 4000 samples/s 4000 samples/s
Status Active Active Active Active Active Active
Datasheet PDF — ILD1320-10 (opens in a new tab) PDF — ILD1320-100 (opens in a new tab) PDF — ILD1320-200 (opens in a new tab) PDF — ILD1320-25 (opens in a new tab) PDF — ILD1320-50 (opens in a new tab) PDF — ILD1320-500 (opens in a new tab)

The industries we serve

Frequently asked questions

Answers to the most common questions about our products and services

Its measurement electronics are integrated into the sensor housing. Connection components are selected separately for the interface and configuration.

No. Micro-Epsilon lists them separately. Compare the relevant specification for the selected model without substituting repeatability for linearity.

The catalogue specifies up to 4 kHz versus a 1 kHz factory setting. Changing it requires the stated setup tools/interface, including IF2001/USB.

No. Dimensions vary by model span and start/mid/end position. Read both dimensions as one spot specification with its measurement position.

No. The 500 mm model has a separate linearity specification. Use its model column and preserve the manufacturer’s white diffuse target conditions.

Didn't find the answer you were looking for?

Talk to an expert

More information

Get a quote or advice

Tell us what you need and an engineer will come back to you.

Request a quote for this product
What would you like to ask for?

Email or phone — one of them is enough

Email or phone — one of them is enough

0 of 500 words