optoNCDT 1760-1000 Laser triangulation
optoNCDT 1760-1000: sensors and measurement devices by Micro-Epsilon for laser triangulation.
Download the datasheet (opens in a new tab) This series on the Micro-Epsilon site (opens in a new tab)
Models in the series
One column per model: what differs between the models of the series.
| Parameter | ILD1760-1000 eli-m-0f3fd27d0c4ea7cd5c2e2001 |
|---|---|
| Interfaces | ethercat |
| Working distance | 1000–2000 mm |
| Operating temperature | 0–50 °C |
| Start of measuring range | 1000 mm |
| quantity_specification | Measuring range 1000 mm; start/midpoint/end 1000/1500/2000 mm. Ambient-light tolerance 10,000 lx. Sensor mass about 800 g. |
| End of measuring range | 2000 mm |
| Protection class (DIN EN 60529) | ip65 |
| Measuring range | 1000 mm |
| Repeatability | 100 µm |
| interface_specification | RS422 / RS485 |
| Measuring rate | 7500 Hz |
| source_linearity_basis | Official maximum linearity deviation ±1000 µm, equivalent to ±0.1% FSO. |
| Linearity | 1000 µm |
| source_sampling_rate_basis | Selectable 7.5, 5, 2.5, 1.25 kHz, 625 Hz and 300 Hz; repeatability is specified at 5 kHz with median 9. |
| source_repeatability_basis | Official repeatability 100 µm at 5 kHz with median 9. |
| Accuracy (% FSO) | 0.1 % |
| Contact | Non-contact |
| Accuracy | 1000 µm |
| ADC sampling rate | 7500 samples/s |
| Status | Active |
| Datasheet | PDF — ILD1760-1000 (opens in a new tab) |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
No. Its net span is 1000 mm and working interval is 1000–2000 mm from the sensor, with a 1500 mm midpoint.
The table specifies up to 7.5 kHz and a 5 kHz factory setting. Changes require the setup path stated in the instructions.
No. It refers to 0.1% FSO of its 1000 mm span, equivalent to 1 mm. Repeatability is separately specified under stated test conditions.
The table lists a light-spot size on the order of 2.5–5 mm. Check that target and measured feature suit the spot at the working distance.
It specifies a 0.25 m pigtail with a 14-pin ODU connector. Select a matching cable; the listed Industrial Ethernet interfaces require an appropriate module.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product