1-T210/0.5NM

From the T210 series

T210: sensors and measurement devices by HBK for torque.

Torque range: -0.5–0.5 Nm
Maximum rotational speed: 30000 rpm

Request a quote for this product Schedule a demonstration Talk to an expert

This series on the HBK site

Official HBK product image from datasheet

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for 1-T210/0.5NM
Maximum rotational speed	30000 rpm
interface_specification	Analog 0-10V
quantity_specification	Actions: Not sellable online; Measurement range: 4.43 in-lb; Nominal rotational speed: 30000 rpm; Size (length): 3.74 in; Output signal: Voltage (+/- 10V), Frequency
Ordering options and constraints	K-T210 — capacity: 0.5 N·m, 1 N·m, 2 N·m, 5 N·m, 10 N·m, 20 N·m, 50 N·m, 100 N·m, 200 N·m; size_length: 95 mm (0.5–2 N·m), 145 mm (5–20 N·m), 170 mm (50–200 N·m); accuracy: S; maximum_speed: S; electrical_output: FA (frequency + analog), L (IO-Link); rotational_speed_system: 0 (none), 1 (512 pulses), 2 (1024 pulses), 3 (IO-Link + speed system); custom_modification: N; io_link_firmware: N / IO01 v1.0.0; constraints: [{"when": {"electrical_output": "L (IO-Link)"}, "allow": {"rotational_speed_system": ["0 (none)", "3 (IO-Link + speed system)"]}, "reason": "The T210 ordering data reserves the IO-Link speed-system option for the IO-Link electrical output."}]
interface_specification	Digital I/O
source_repeatability_basis	Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred.
source_torque_speed_measurement	True
source_linearity_basis	No single accuracy class is inferred when it is not shown for the exact ordering code.
source_sampling_rate_basis	Torque and speed outputs are conditioned by the selected HBK interface; no unsupported digital rate is inferred.
source_pressure_output	Voltage (+/- 10V), Frequency
source_sampling_rate_limited_by_readout	False