C10-1000kN

From the C10 series

C10: sensors and measurement devices by HBK for force.

Force range: 0–1000000 N

Request a quote for this product Schedule a demonstration Talk to an expert

This series on the HBK site

Representative official C10 datasheet photo — labeled 100 kN example; dimensions and capacity vary by model

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for C10-1000kN
Force range	0–1000000 N
Accuracy (% FSO)	0.02 %
Interfaces	ethernet
interface_specification	Analog 0-10V
Operating temperature	-10–60 °C
Protection class (DIN EN 60529)	ip64
quantity_specification	1000 kN rated capacity = 1,000 kN (101.9716 t mass equivalent at standard gravity); compression
ADC sampling rate	40000 samples/s
Ordering options and constraints	K-C10 — capacity: 2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN; bridge: SB, DB; rated_output: N, J; calibration: 50%, 100%; teds: Not selected, T; mechanical_design: W adapter, N flange; plug_protection: P, U; electrical_connection: B, G, K (6 m), V (15 m), 00A4 (VAIO); force_application: O, L; cable_plug: Y, F, Q, N, P, M, X; integrated_amplifier: N, VAIO; constraints: [{"when": {"teds": "T"}, "deny": {"integrated_amplifier": ["VAIO"]}, "reason": "TEDS and the integrated VAIO amplifier are mutually exclusive in the official configuration."}, {"when": {"integrated_amplifier": "VAIO"}, "allow": {"electrical_connection": "00A4 (VAIO)"}, "reason": "The VAIO connection is reserved for the integrated-amplifier option."}]
Protection class (DIN EN 60529)	ip67
Protection class (DIN EN 60529)	ip68
Interfaces	profinet
source_sampling_rate_basis	MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth
Operating temperature	-30–85 °C
Interfaces	ethercat
ADC sampling rate	19200 samples/s
ADC sampling rate	450 samples/s
ADC sampling rate	1111 samples/s
Interfaces	io_link
interface_specification	Digital I/O
source_sampling_rate_basis	ClipX fixed internal sampling rate; verify the configured filter and usable output bandwidth
source_sampling_rate_basis	DMP41 selectable result rate, intended for reference and calibration measurements
interface_specification	RS422 / RS485
source_sampling_rate_basis	0.9 ms minimum IO-Link process-data cycle; the sensor electronics sample internally at 40 kHz