1-C9C/0.5KN

Name: 1-C9C/0.5KN
Brand: HBK
SKU: eli-m-d3b33b03abb8d3bf145e86f2

From the C9C series

C9C: sensors and measurement devices by HBK for force.

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for 1-C9C/0.5KN
interface_specification	Unknown
Operating temperature	-30–85 °C
Protection class (DIN EN 60529)	ip67
quantity_specification	Maximum capacity (nominal load): 112 lbf; Output signal: mV/V (passive strain gauge); Height (without accessories): 0.512 in; Diameter (without cable or plug): 2.066925 in
Ordering options and constraints	K-C9C — capacity: 50 N, 100 N, 200 N, 0.5 kN, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN; cable_length: 1.5 m, 3 m, 5 m, 6 m, 7 m, 12 m; output: mV/V, 0…10 V, 4…20 mA, IO-Link, VA1, VA2, VAIO; connector: Y, F, Q, N, M, M12; teds: Not selected, T; mechanical_interface: Spherical load introduction; constraints: [{"when": {"output": ["VA1", "VA2", "VAIO"]}, "allow": {"cable_length": ["1.5 m", "3 m"]}, "reason": "HBK limits inline-amplifier variants to the documented short cable lengths."}, {"when": {"teds": "T"}, "deny": {"connector": "M12", "output": ["VA1", "VA2", "VAIO"]}, "reason": "TEDS is available with plug variants, not free-end/M12 or inline-amplifier variants."}]
source_sampling_rate_limited_by_readout	True
source_linearity_basis	No single accuracy class is inferred when it is not shown for the exact ordering code.
source_sampling_rate_basis	The selected HBK conditioner, filter and DAQ determine the digital sample rate.
source_pressure_output	mV/V (passive strain gauge)
source_repeatability_basis	Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred.