DY (Double linear) Strain
DY (Double linear): sensors and measurement devices by HBK for strain.
Visit the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| gauge_carrier_width | 6–9.4 mm |
|---|---|
| Grid width | 1.8–6 mm |
| drawing_dimension | 2.7–12.5 mm |
| gauge_carrier_length | 5.5–12.5 mm |
| Maximum excitation voltage | 5–14 V |
| Grid length | 1.5–6 mm |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | 1-DY11-3/350 eli-m-101efeced6ade06b4a385243 | 1-DY11-6/350 eli-m-74d1a2075a372143d2fe1a45 | 1-DY11-6/350ZE eli-m-d624f115cf32c247a06574a1 | 1-DY13-3/350 eli-m-60e250e0dfbe997944dd70e5 | 1-DY13-6/350 eli-m-df4b7db2485573ed38d58dc9 | 1-DY15-3/350 eli-m-ef1731de1a246bca084a9aae | 1-DY15-6/350 eli-m-d143e288866665f39bb4a3a8 | 1-DY16-3/350 eli-m-f9a56aa8087cdbb34de0a0f8 | 1-DY16-6/350 eli-m-eea94cf5bb9455e9fd43dc53 | 1-DY17-3/350 eli-m-217918875769472c67c92975 | 1-DY17-6/350 eli-m-4393249b360b84975fb21ead | 1-DY18-3/350 eli-m-73151c5301dc2d396a5b3cf4 | 1-DY18-6/350 eli-m-dd3ffded5dfe5da5c9dbf57d | 1-DY41-1.5/350 eli-m-8181a8c810472a2715e3fade | 1-DY41-3/350 eli-m-e291f8bcaa383f08960a493a | 1-DY41-6/350 eli-m-1edf53dd2be4da779d145692 | 1-DY43-1.5/350 eli-m-4e86f1ca41b11431b9714f38 | 1-DY43-3/350 eli-m-55d1addcacb92ee57d67c5e0 | 1-DY43-6/350 eli-m-5a12cf666e8a6aca97c22f25 | 1-DY45-1.5/350 eli-m-75ef35955bc150357872bb34 | 1-DY45-3/350 eli-m-043992a6b2114a77f5522a70 | 1-DY45-6/350 eli-m-8586488e0d864b9cb0a8ac30 | 1-DY46-3/350 eli-m-1e39a5204814f34210700877 | 1-DY46-6/350 eli-m-f3bc6df250f68dca1847221f | 1-DY47-3/350 eli-m-49c7f10980e8dcfcfbf8c62d | 1-DY47-6/350 eli-m-0fc1894c7b3953f81c0baa55 | 1-DY48-3/350 eli-m-a1b10909a2f49ce288b5e470 | 1-DY48-6/350 eli-m-395795c9984b48c882b36aa8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gauge resistance | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω | 350 Ω |
| source_solder_terminal_or_cable_connection | LS 7 | LS 7 | Pre-wired (TPE-insulated ribbon cable) | LS 7 | LS 7 | Leads | Leads | Leads | Leads | Leads | Leads | Leads | LS 7 | Integrated solder tabs | Integrated solder tabs | Integrated solder tabs | Integrated solder tabs | LS 7 | Integrated solder tabs | LS 7 | LS 7 | LS 7 | LS 7 | Integrated solder tabs | Integrated solder tabs | LS 7 | Integrated solder tabs | LS 7 |
| gauge_carrier_width | 8 mm | 9.4 mm | 9 mm | 8 mm | 9.4 mm | 8 mm | 9.4 mm | 8 mm | 9.4 mm | 8 mm | 9.4 mm | 8 mm | 9.4 mm | 6 mm | 8 mm | 9 mm | 6 mm | 8 mm | 9 mm | 6 mm | 8 mm | 9 mm | 8 mm | 9 mm | 8 mm | 9 mm | 8 mm | 9 mm |
| interface_specification | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown |
| quantity_specification | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); Pre-wired (TPE-insulated ribbon cable); Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Aluminium (23 ppm/K; 12.8 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Aluminium (23 ppm/K; 12.8 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Austenitic steel (16 ppm/K; 8.9 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Austenitic steel (16 ppm/K; 8.9 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Silica / composite (0,5 ppm/K; 0.3 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Silica / composite (0,5 ppm/K; 0.3 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Plastic (65 ppm/K; 36.1 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Plastic (65 ppm/K; 36.1 ppm/°F); Leads; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Aluminium (23 ppm/K; 12.8 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Aluminium (23 ppm/K; 12.8 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Aluminium (23 ppm/K; 12.8 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Austenitic steel (16 ppm/K; 8.9 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Austenitic steel (16 ppm/K; 8.9 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Austenitic steel (16 ppm/K; 8.9 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Silica / composite (0,5 ppm/K; 0.3 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Silica / composite (0,5 ppm/K; 0.3 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Plastic (65 ppm/K; 36.1 ppm/°F); Integrated solder tabs; Bondable | Strain gauge; Double linear; Constantan (ca 2.0); Standard (up to 200°C); Plastic (65 ppm/K; 36.1 ppm/°F); Integrated solder tabs; Bondable |
| Grid width | 2.7 mm | 3.2 mm | 3.2 mm | 2.7 mm | 3.2 mm | 2.7 mm | 3.2 mm | 2.7 mm | 3.2 mm | 2.7 mm | 3.2 mm | 2.7 mm | 3.2 mm | 1.8 mm | 6 mm | 3.2 mm | 1.8 mm | 6 mm | 3.2 mm | 1.8 mm | 6 mm | 3.2 mm | 6 mm | 3.2 mm | 6 mm | 3.2 mm | 6 mm | 3.2 mm |
| source_linearity_basis | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. | Use the exact HBK gauge factor, transverse sensitivity and batch calibration values supplied with the ordering code. |
| drawing_dimension | 8 mm | 12.5 mm | Not specified | 8 mm | 3.2 mm | 8 mm | 3.2 mm | 2.7 mm | 12.5 mm | 3 mm | 6 mm | 8 mm | 9.4 mm | 5.5 mm | 2.7 mm | 6 mm | Not specified | 8.199999999999999 mm | Not specified | 6 mm | 8.199999999999999 mm | 6 mm | 3 mm | 10.7 mm | 8.199999999999999 mm | 10.7 mm | 8.199999999999999 mm | 6 mm |
| source_geometry | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear | Double linear |
| gauge_carrier_length | 9 mm | 12.5 mm | 10.7 mm | 9 mm | 12.5 mm | 9 mm | 12.5 mm | 9 mm | 12.5 mm | 9 mm | 12.5 mm | 9 mm | 12.5 mm | 5.5 mm | 8.199999999999999 mm | 10.7 mm | 5.5 mm | 8.199999999999999 mm | 10.7 mm | 5.5 mm | 8.199999999999999 mm | 10.7 mm | 8.199999999999999 mm | 10.7 mm | 8.199999999999999 mm | 10.7 mm | 8.199999999999999 mm | 10.7 mm |
| source_repeatability_basis | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. | No unsupported standalone repeatability is inferred; installed repeatability is verified after bonding and shunt calibration. |
| Maximum excitation voltage | 9 V | 14 V | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 5 V | 8.5 V | 13 V | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| source_package_quantity_pcs | 5 | 5 | Not specified | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | Not specified | 5 | Not specified | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Grid length | 3 mm | 6 mm | 6 mm | 3 mm | 6 mm | 3 mm | 6 mm | 3 mm | 6 mm | 3 mm | 6 mm | 3 mm | 6 mm | 1.5 mm | 3 mm | 6 mm | 1.5 mm | 3 mm | 6 mm | 1.5 mm | 3 mm | 6 mm | 3 mm | 6 mm | 3 mm | 6 mm | 3 mm | 6 mm |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product