T40CB Torque
T40CB: sensors and measurement devices by HBK for torque.
This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Torque range | -1000–1000 Nm |
|---|
Models in the series
One column per model: what differs between the models of the series.
| Parameter | T40CB-1kNm eli-m-0fe3c72475337d39134d91b0 | T40CB-500Nm eli-m-efb116e5cacc6812f4ae1c1e |
|---|---|---|
| Torque range | -1000–1000 Nm | -500–500 Nm |
| source_torque_speed_measurement | True | True |
| Interfaces | ethernet | profinet |
| Maximum rotational speed | 30000 rpm | 30000 rpm |
| quantity_specification | ±1 kNm rated torque; rotating installation; maximum 30,000 rpm | ±500 Nm rated torque; rotating installation; maximum 30,000 rpm |
| source_sampling_rate_basis | TIM40 bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-PN bus cycle; transducer bandwidth and selected filters remain limiting factors |
| interface_specification | Digital I/O | Digital I/O |
| ADC sampling rate | 20000 samples/s | 20000 samples/s |
| Status | Active | Active |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
No. The family brochure’s 6 kHz at −3 dB describes frequency response. TIM-EC separately specifies a bus rate up to 20 kHz. Evaluate both for the selected system path.
No. TMC is the torque measurement communication interface. The brochure identifies separate TIM modules: TIM-EC for EtherCAT and TIM-PN for PROFINET. Select the corresponding adapter.
The brochure identifies 37.5 or 46.5 mm central bores and lightweight titanium construction. Check bore and connection dimensions against the assembly that must pass through the flange.
The brochure lists 500 N·m and 1 kN·m, with other ranges on request. Do not turn an on-request option into a standard model code without documentation.
No. The brochure describes digital rotor-to-stator transmission without measurement-system bearings or slip rings. Appropriate mechanical installation is still required.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product