T40HS Torque
T40HS: sensors and measurement devices by HBK for torque.
This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Torque range | -3000–3000 Nm |
|---|---|
| ADC sampling rate | 1000–4000 samples/s |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | T40HS eli-m-b082c6d4f78a1ed118925b33 | T40HS-100Nm eli-m-597b1d21900b54ef371b0d43 | T40HS-3kNm eli-m-df68967b6889aee800d5ca5f |
|---|---|---|---|
| quantity_specification | Configurable family; exact public ordering-code table not exposed on the current HBK page. | ±100 Nm rated torque; rotating installation; maximum 45,000 rpm | ±3 kNm rated torque; rotating installation; maximum 45,000 rpm |
| interface_specification | Unknown | Digital I/O | Digital I/O |
| Torque range | Not specified | -100–100 Nm | -3000–3000 Nm |
| Interfaces | Not specified | profinet | profinet |
| source_torque_speed_measurement | Not specified | True | True |
| Maximum rotational speed | Not specified | 45000 rpm | 45000 rpm |
| source_sampling_rate_basis | Not specified | TIM40 bus cycle; transducer bandwidth and selected filters remain limiting factors | TIM-EC bus cycle; transducer bandwidth and selected filters remain limiting factors |
| ADC sampling rate | Not specified | 1000 samples/s | 4000 samples/s |
| Status | Active | Active | Active |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
No. The family brochure’s 6 kHz at −3 dB describes frequency response. TIM-EC separately specifies a bus rate up to 20 kHz. Evaluate both for the selected system path.
No. TMC is the torque measurement communication interface. The brochure identifies separate TIM modules: TIM-EC for EtherCAT and TIM-PN for PROFINET. Select the corresponding adapter.
The brochure describes lightweight titanium construction with low inertia for high-speed torque measurement. System suitability also depends on capacity and mechanical connection.
No. The brochure specifies up to 45,000 rpm depending on range. Use the speed rating for the exact torque version.
No. The brochure separately lists nonlinearity including hysteresis and relative standard deviation of repeatability. Preserve each definition’s reference basis.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product