K-U9C · 2 kN

Name: K-U9C · 2 kN
Brand: HBK
SKU: eli-m-74bd57bd04888336fb8570e6

From the U9C series

U9C: sensors and measurement devices by HBK for force.

Capacity and selected options are specific to this record. Remaining options: HBK-K-U9C-v1

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for K-U9C · 2 kN
Nominal force capacity	2000 N
Ordering options and constraints	K-U9C — capacity: 50 N, 100 N, 200 N, 0.5 kN, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN; cable_length: 1.5 m, 3 m, 5 m, 6 m, 7 m, 12 m; output: mV/V, 0…10 V, 4…20 mA, IO-Link, VA1, VA2, VAIO; connector: Y, F, Q, N, M, M12; teds: Not selected, T; mechanical_interface: Both sides central external thread; constraints: [{"when": {"output": ["VA1", "VA2", "VAIO"]}, "allow": {"cable_length": ["1.5 m", "3 m"]}, "reason": "HBK limits inline-amplifier variants to the documented short cable lengths."}, {"when": {"teds": "T"}, "deny": {"connector": "M12", "output": ["VA1", "VA2", "VAIO"]}, "reason": "TEDS is available with plug variants, not free-end/M12 or inline-amplifier variants."}]
Selected configuration options	2 kN nominal force capacity

1-KAB168-5 eli-m-046536f442a5e67f7cc58f5d Only for source configuration configuration-0b3c45c83b1c82cb7ec049ae: K-U9C · 50 kN configuration; selected configuration must be matched before display.; For the VA1 voltage or VA2 current inline amplifier, not a passive bridge or 4-pin VAIO IO-Link port. This is the amplifier-output cable, separate from the factory sensor-to-amplifier lead.
1-KAB168-20 eli-m-5e112d12af4c97508e292545 Only for source configuration configuration-0b3c45c83b1c82cb7ec049ae: K-U9C · 50 kN configuration; selected configuration must be matched before display.; For the VA1 voltage or VA2 current inline amplifier, not a passive bridge or 4-pin VAIO IO-Link port. This is the amplifier-output cable, separate from the factory sensor-to-amplifier lead.

1-Z8/100kg/ZGW eli-m-bf23a1faf58ae8f55e2bd45f Only for source configuration configuration-15baabd39101a13d80286f25: K-U9C · 1 kN configuration; selected configuration must be matched before display.; Match rated force and thread, and verify permissible alignment and load introduction. Not a compression thrust piece.
1-U9/20kN/ZGWR eli-m-396f312efb721b7c058eb986 Only for source configuration configuration-4f34f08eae26369ac08d370a: K-U9C · 20 kN configuration; selected configuration must be matched before display.; Match rated force and thread, and verify permissible alignment and load introduction. Not a compression thrust piece.
1-U9a/50kN/ZGW eli-m-915fce29decc30e88ccf63fc Only for source configuration configuration-0b3c45c83b1c82cb7ec049ae: K-U9C · 50 kN configuration; selected configuration must be matched before display.; Match rated force and thread, and verify permissible alignment and load introduction. Not a compression thrust piece.