1-Z7AD1/10T

From the Z7A series

Z7A: sensors and measurement devices by HBK for force.

Force range: 0–98066.5 N
Bridge sensitivity: 2 mV/V

Request a quote for this product Schedule a demonstration Talk to an expert

This series on the HBK site

HBK product photograph from the datasheet; the pictured example is a 2 t Z7A, not each capacity variant

Technical specification

Every engineering figure, laid out to scan quickly

Technical specification for 1-Z7AD1/10T
Force range	0–98066.5 N
Accuracy (% FSO)	1 %
Bridge sensitivity	2 mV/V
Maximum excitation voltage	18 V
source_input_resistance_ohm	350 ohm
source_safe_load_limit_percent_emax	150% of Emax
source_breaking_load_source_value	300
source_permissible_dynamic_load_vibration_amplitude_percent_emax	70
interface_specification	Unknown
Storage temperature	-50–85 °C
Operating temperature	-30–70 °C
Nominal temperature range	-10–40 °C
Protection class (DIN EN 60529)	ip67
Weight	8 kg
Mounting torque	1150 Nm
source_max_load_cell_verification_intervals	1000
source_minimum_verification_interval_percent_emax	0.0357
source_minimum_verification_interval_ratio_y	2800
quantity_specification	Maximum capacity: 22046 lb; Accuracy class: D1; Minimum verification interval (Vmin): 3570 g
source_accuracy_class	D1
source_nominal_displacement_mm	approximately 0.7 mm
Ordering options and constraints	K-Z7A_ — capacity: 1102.31 lb, 2204.62 lb, 4409.24 lb, 11023.11 lb, 22046.22 lb; accuracy_class: D1, C3; minimum_verification_interval_vmin: 178.5 g, 357 g, 714 g, 1785 g, 3570 g, 200 g, 500 g, 1000 g; constraints: []
source_repeatability_basis	Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred.
source_sampling_rate_limited_by_readout	True
source_linearity_basis	Official family-table accuracy class: D1; retained as a class, not converted to overall installed-chain accuracy.
source_sampling_rate_basis	The selected HBK conditioner, filter and DAQ determine the digital sample rate.