Z7A Force
Z7A: sensors and measurement devices by HBK for force.
This series on the HBK site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
| Ordering options and constraints | K-Z7A_ — capacity: 1102.31 lb, 2204.62 lb, 4409.24 lb, 11023.11 lb, 22046.22 lb; accuracy_class: D1, C3; minimum_verification_interval_vmin: 178.5 g, 357 g, 714 g, 1785 g, 3570 g, 200 g, 500 g, 1000 g; constraints: [] |
|---|
Range across models
The span covered by the models of the series together — not the range of each model.
| Operating temperature | -30–70 °C |
|---|---|
| Protection class (DIN EN 60529) | ip67 |
| Weight | 2.3 kg |
| Force range | 0–19613.276675 N |
| Nominal temperature range | -10–40 °C |
| Mounting torque | 135 Nm |
| Storage temperature | -50–85 °C |
| Maximum excitation voltage | 18 V |
| Bridge sensitivity | 2 mV/V |
| Accuracy (% FSO) | 1–3 % |
| Nominal force capacity | 4903.319169–98066.47234 N |
| ADC sampling rate | 19200–40000 samples/s |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | 1-Z7AC3/10T eli-m-52a1ea6e61143c2c8f54736c | 1-Z7AC3/2T eli-m-d2d876f0a72320ad195c9935 | 1-Z7AC3/5T eli-m-078a9f1af5890d0e82ab219f | 1-Z7AD1/10T eli-m-26aeed94c7f5042f1908aa34 | 1-Z7AD1/1T eli-m-f2177eb2798adb2128532fc6 | 1-Z7AD1/2T eli-m-2a50f24eacc1891e68acd8cb | 1-Z7AD1/500KG eli-m-b26144196b4de5150f5e6fe5 | 1-Z7AD1/5T eli-m-4f86ee2a21accbeb510d0404 | K-Z7A_ · 1102.31 lb eli-m-e82f2db132747aa360681262 | K-Z7A_ · 11023.11 lb eli-m-b674c0186cc2e6806daf69a7 | K-Z7A_ · 2204.62 lb eli-m-ad79c7194bc0659349e58baa | K-Z7A_ · 22046.22 lb eli-m-d33f5764af4e36bec95cc62d | K-Z7A_ · 4409.24 lb eli-m-2a8058658b8ae396ddde242b | Z7A-0p5t eli-m-8d623c9a9ce35f7b85782f00 | Z7A-10t eli-m-32dfaf6835517909dcdf54e9 | Z7A-1t eli-m-74e00af838952251fc02e6d8 | Z7A-2t eli-m-a518342df6573ea2c2da29d9 | Z7A-5t eli-m-d1341a91c8fa9e0d5da0c491 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Operating temperature | -30–70 °C | -30–70 °C | -30–70 °C | -30–70 °C | -30–70 °C | -30–70 °C | -30–70 °C | -30–70 °C | Not specified | Not specified | Not specified | Not specified | Not specified | -30–70 °C | -30–70 °C | -30–70 °C | -30–70 °C | -30–70 °C |
| Protection class (DIN EN 60529) | ip67 | ip67 | ip67 | ip67 | ip67 | ip67 | ip67 | ip67 | Not specified | Not specified | Not specified | Not specified | Not specified | ip67 | ip67 | ip67 | ip67 | ip67 |
| Weight | 8 kg | 2.3 kg | 5 kg | 8 kg | 2.3 kg | 2.3 kg | 2.3 kg | 5 kg | Not specified | Not specified | Not specified | Not specified | Not specified | 2.3 kg | 8 kg | 2.3 kg | 2.3 kg | 5 kg |
| Force range | 0–98066.5 N | 0–19613.3 N | 0–49033.25 N | 0–98066.5 N | 0–9806.65 N | 0–19613.3 N | 0–4903.325 N | 0–49033.25 N | Not specified | Not specified | Not specified | Not specified | Not specified | 0–4903.325 N | 0–98066.5 N | 0–9806.65 N | 0–19613.3 N | 0–49033.25 N |
| Nominal temperature range | -10–40 °C | -10–40 °C | -10–40 °C | -10–40 °C | -10–40 °C | -10–40 °C | -10–40 °C | -10–40 °C | Not specified | Not specified | Not specified | Not specified | Not specified | -10–40 °C | -10–40 °C | -10–40 °C | -10–40 °C | -10–40 °C |
| Mounting torque | 1150 Nm | 135 Nm | 660 Nm | 1150 Nm | 135 Nm | 135 Nm | 135 Nm | 660 Nm | Not specified | Not specified | Not specified | Not specified | Not specified | 135 Nm | 1150 Nm | 135 Nm | 135 Nm | 660 Nm |
| Storage temperature | -50–85 °C | -50–85 °C | -50–85 °C | -50–85 °C | -50–85 °C | -50–85 °C | -50–85 °C | -50–85 °C | Not specified | Not specified | Not specified | Not specified | Not specified | -50–85 °C | -50–85 °C | -50–85 °C | -50–85 °C | -50–85 °C |
| Maximum excitation voltage | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V | 18 V | Not specified | Not specified | Not specified | Not specified | Not specified | 18 V | 18 V | 18 V | 18 V | 18 V |
| Bridge sensitivity | 2 mV/V | 2 mV/V | 2 mV/V | 2 mV/V | 2 mV/V | 2 mV/V | 2 mV/V | 2 mV/V | Not specified | Not specified | Not specified | Not specified | Not specified | 2 mV/V | 2 mV/V | 2 mV/V | 2 mV/V | 2 mV/V |
| interface_specification | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Unknown | Not specified | Not specified | Not specified | Not specified | Not specified | Analog 0-10V | Digital I/O | Digital I/O | Digital I/O | Digital I/O |
| source_input_resistance_ohm | 350 ohm | 350 ohm | 350 ohm | 350 ohm | 350 ohm | 350 ohm | 350 ohm | 350 ohm | Not specified | Not specified | Not specified | Not specified | Not specified | 350 ohm | 350 ohm | 350 ohm | 350 ohm | 350 ohm |
| source_minimum_verification_interval_ratio_y | 10000 | 10000 | 10000 | 2800 | 2800 | 2800 | 2800 | 2800 | Not specified | Not specified | Not specified | Not specified | Not specified | 2800 | 10000 | 2800 | 2800 | 2800 |
| source_max_load_cell_verification_intervals | 3000 | 3000 | 3000 | 1000 | 1000 | 1000 | 1000 | 1000 | Not specified | Not specified | Not specified | Not specified | Not specified | 1000 | 1000 | 1000 | 1000 | 3000 |
| Accuracy (% FSO) | 3 % | 3 % | 3 % | 1 % | 1 % | 1 % | 1 % | 1 % | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| source_permissible_dynamic_load_vibration_amplitude_percent_emax | 70 | 70 | 70 | 70 | 70 | 70 | 70 | 70 | Not specified | Not specified | Not specified | Not specified | Not specified | 70 | 70 | 70 | 70 | 70 |
| source_safe_load_limit_percent_emax | 150% of Emax | 150% of Emax | 150% of Emax | 150% of Emax | 150% of Emax | 150% of Emax | 150% of Emax | 150% of Emax | Not specified | Not specified | Not specified | Not specified | Not specified | 150% of Emax | 150% of Emax | 150% of Emax | 150% of Emax | 150% of Emax |
| source_minimum_verification_interval_percent_emax | 0.01 | 0.01 | 0.01 | 0.0357 | 0.0357 | 0.0357 | 0.0357 | 0.0357 | Not specified | Not specified | Not specified | Not specified | Not specified | 0.0357 | 0.01 | 0.0357 | 0.0357 | 0.01 |
| source_accuracy_class | C3 | C3 | C3 | D1 | D1 | D1 | D1 | D1 | Not specified | Not specified | Not specified | Not specified | Not specified | D1 | C3 | D1 | C3 | C3 |
| source_breaking_load_source_value | 300 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | Not specified | Not specified | Not specified | Not specified | Not specified | 300 | 300 | 300 | 300 | 300 |
| source_sampling_rate_limited_by_readout | True | True | True | True | True | True | True | True | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| source_nominal_displacement_mm | approximately 0.7 mm | approximately 0.35 mm | approximately 0.45 mm | approximately 0.7 mm | approximately 0.3 mm | approximately 0.35 mm | approximately 0.25 mm | approximately 0.45 mm | Not specified | Not specified | Not specified | Not specified | Not specified | approximately 0.25 mm | approximately 0.7 mm | approximately 0.3 mm | approximately 0.35 mm | approximately 0.45 mm |
| source_linearity_basis | Official family-table accuracy class: C3; retained as a class, not converted to overall installed-chain accuracy. | Official family-table accuracy class: C3; retained as a class, not converted to overall installed-chain accuracy. | Official family-table accuracy class: C3; retained as a class, not converted to overall installed-chain accuracy. | Official family-table accuracy class: D1; retained as a class, not converted to overall installed-chain accuracy. | Official family-table accuracy class: D1; retained as a class, not converted to overall installed-chain accuracy. | Official family-table accuracy class: D1; retained as a class, not converted to overall installed-chain accuracy. | Official family-table accuracy class: D1; retained as a class, not converted to overall installed-chain accuracy. | Official family-table accuracy class: D1; retained as a class, not converted to overall installed-chain accuracy. | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| quantity_specification | Maximum capacity: 22046 lb; Accuracy class: C3; Minimum verification interval (Vmin): 1000 g | Maximum capacity: 4409 lb; Accuracy class: C3; Minimum verification interval (Vmin): 200 g | Maximum capacity: 11023 lb; Accuracy class: C3; Minimum verification interval (Vmin): 500 g | Maximum capacity: 22046 lb; Accuracy class: D1; Minimum verification interval (Vmin): 3570 g | Maximum capacity: 2205 lb; Accuracy class: D1; Minimum verification interval (Vmin): 100 g | Maximum capacity: 4409 lb; Accuracy class: D1; Minimum verification interval (Vmin): 714 g | Maximum capacity: 1102 lb; Accuracy class: D1; Minimum verification interval (Vmin): 178.5 g | Maximum capacity: 11023 lb; Accuracy class: D1; Minimum verification interval (Vmin): 1785 g | Not specified | Not specified | Not specified | Not specified | Not specified | 0.5 t rated capacity = 4.9033 kN (500 kg mass equivalent at standard gravity); compression | 10 t rated capacity = 98.0665 kN (10 t mass equivalent at standard gravity); compression | 1 t rated capacity = 9.8067 kN (1 t mass equivalent at standard gravity); compression | 2 t rated capacity = 19.6133 kN (2 t mass equivalent at standard gravity); compression | 5 t rated capacity = 49.0333 kN (5 t mass equivalent at standard gravity); compression |
| source_repeatability_basis | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Use the individual calibration certificate and installed-chain verification; no unsupported scalar repeatability is inferred. | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified |
| source_sampling_rate_basis | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | The selected HBK conditioner, filter and DAQ determine the digital sample rate. | Not specified | Not specified | Not specified | Not specified | Not specified | ClipX fixed internal sampling rate; verify the configured filter and usable output bandwidth | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth | MX840B maximum per-channel sample rate; sensor mechanics and filter settings can reduce usable bandwidth |
| Selected configuration options | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 1102.31 lb nominal force capacity | 11023.11 lb nominal force capacity | 2204.62 lb nominal force capacity | 22046.22 lb nominal force capacity | 4409.24 lb nominal force capacity | Not specified | Not specified | Not specified | Not specified | Not specified |
| Nominal force capacity | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 4903.319168761343 N | 49033.23616982958 N | 9806.638337522685 N | 98066.47233965916 N | 19613.27667504537 N | Not specified | Not specified | Not specified | Not specified | Not specified |
| Published accuracy class | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Official family-table accuracy class: D1, C3 | Official family-table accuracy class: D1, C3 | Official family-table accuracy class: D1, C3 | Official family-table accuracy class: D1, C3 | Official family-table accuracy class: D1, C3 | Not specified | Not specified | Not specified | Not specified | Not specified |
| ADC sampling rate | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | 19200 samples/s | 19200 samples/s | 40000 samples/s | 40000 samples/s | 40000 samples/s |
| Interfaces | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | Not specified | ethernet | profinet | ethercat | ethernet | ethernet |
| Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
| Datasheet | PDF — K-Z7A_ · 1102.31 lb (opens in a new tab) | PDF — K-Z7A_ · 11023.11 lb (opens in a new tab) | PDF — K-Z7A_ · 2204.62 lb (opens in a new tab) | PDF — K-Z7A_ · 22046.22 lb (opens in a new tab) | PDF — K-Z7A_ · 4409.24 lb (opens in a new tab) |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
Z7A offers 0.5, 1, 2, 5 and 10 t maximum capacities. Check threads, dimensions, deflection and permissible side loads for the particular capacity.
No. The D1 table covers 0.5–10 t, while C3 lists 2, 5 and 10 t. D1 and C3 correspond to 1000 and 3000 verification intervals respectively, not sampling rates.
The datasheet specifies six-wire connection and 2 mV/V nominal sensitivity. Use a suitable excited strain-gauge bridge input and preserve the cell data in system calibration.
No. Ingress protection is IP67, but the measuring body is specified as galvanized steel. Cable-gland material is specified separately. Do not infer body material from IP rating.
Yes. The higher parenthesized side-load values require stops preventing cell-base movement, and the manufacturer warns of significant error effects under that condition. ZEL and ZPL supports are listed as separately ordered accessories.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product