Machine protection Vibration controllers
Machine protection: measurement controllers by Brüel & Kjær Vibro for vibration controllers.
Visit the Brüel & Kjær Vibro site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Number of measurement channels | 1–2 |
|---|---|
| Operating temperature | -30–65 °C |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | VC-1000 eli-m-19a8fcd980babf98dd7f9b08 | VC-1100 eli-m-505aa41fa674660b8a0f12bd | VC-1500 eli-m-4bf961f813acf186134fc183 | VC-850 eli-m-126caf52633c63f3c59206f7 | VC-868 eli-m-4f1f85532ee64a4d9dd2c9cf | VC-869 eli-m-cdaf87e78bc13be5cc1eaac4 | VC-920 eli-m-8804955af9706c95cd02b5a4 | VC-920-2k eli-m-ac4e6271a01b930336a5fa05 |
|---|---|---|---|---|---|---|---|---|
| Number of measurement channels | 1 | 2 | 2 | 1 | 1 | 1 | 1 | 1 |
| Protection class (DIN EN 60529) | ip65 | ip65 | ip20 | Not specified | ip65 | ip65 | ip20 | ip20 |
| source_linearity_basis | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. | Not specified | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. | Not specified |
| interface_specification | Analog 0–10 V | Plug-in terminal blocks | 24 V DC logic inputs | Not specified | Relay alarm contact | Relay alarm contact | Two potential-free limit-relay contacts | Not specified |
| source_repeatability_basis | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. | Not specified | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. | Not specified |
| Operating temperature | 0–65 °C | 0–50 °C | 0–55 °C | -20–65 °C | -30–65 °C | -30–65 °C | 0–50 °C | 0–50 °C |
| quantity_specification | Die-cast housing, relay and analog outputs. | Two channels; relay and analog outputs; RS-232 system connection. | Two measurement points; systems of up to 40 devices via CAN bus. | Not specified | Single-channel robust vibration switch with relay alarm. | Single-channel robust vibration switch with relay alarm. | Control-cabinet mounting, chain OK monitoring and process-control output. | Not specified |
| source_sampling_rate_basis | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. | Not specified | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. | Not specified |
| Frequency response | Not specified | 10–1000 Hz | Not specified | 10–1000 Hz | Not specified | Not specified | Not specified | Not specified |
| Status | Active | Active | Active | Active | Active | Active | Active | Active |
| Datasheet | PDF — VC-1000 (opens in a new tab) | PDF — VC-1100 (opens in a new tab) | PDF — VC-1500 (opens in a new tab) | PDF — VC-850 (opens in a new tab) | PDF — VC-868 (opens in a new tab) | PDF — VC-869 (opens in a new tab) | PDF — VC-920 (opens in a new tab) | PDF — VC-920-2k (opens in a new tab) |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product