VC-1100
From the Machine protection series
Machine protection: measurement controllers by Brüel & Kjær Vibro for vibration controllers.
- Frequency response
- 10–1000 Hz
- Number of measurement channels
- 2
Technical specification
Every engineering figure, laid out to scan quickly
| Number of measurement channels | 2 |
|---|---|
| interface_specification | Plug-in terminal blocks |
| Operating temperature | 0–50 °C |
| Protection class (DIN EN 60529) | ip65 |
| quantity_specification | Two channels; relay and analog outputs; RS-232 system connection. |
| Frequency response | 10–1000 Hz |
| source_repeatability_basis | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. |
| interface_specification | Sensor OK monitoring |
| source_sampling_rate_basis | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. |
| interface_specification | Analog 0-10V |
| interface_specification | Two programmable analog outputs (0/4–20 mA or 0–10 V) |
| interface_specification | Galvanically separated buffered sensor-signal output |
| interface_specification | Digital I/O |
| source_linearity_basis | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. |
| interface_specification | Three potential-free relay outputs |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product