VIBROCONTROL 6000 Vibration
VIBROCONTROL 6000: data acquisition systems by Brüel & Kjær Vibro for vibration.
Download the datasheet (opens in a new tab) This series on the Brüel & Kjær Vibro site (opens in a new tab)
Shared technical specifications for the series
Properties every model in the series has. What differs is in the models table below.
Range across models
The span covered by the models of the series together — not the range of each model.
| Protection class (DIN EN 60529) | ip20 |
|---|---|
| Interfaces | ethernet |
| Number of measurement channels | 48 |
| Operating temperature | -5–65 °C |
Models in the series
One column per model: what differs between the models of the series.
| Parameter | VC-6000 eli-m-047b719deac62c4e02c9b7e7 | VC-6000 Compact monitor eli-m-761c28d9198b624894122ee6 |
|---|---|---|
| Protection class (DIN EN 60529) | ip20 | ip20 |
| Interfaces | rs485 | ethernet |
| Number of measurement channels | 48 | 3 |
| Operating temperature | Not specified | -20–70 °C |
| interface_specification | buffered time-signal outputs | Optional OPC/Ethernet gateway |
| source_sampling_rate_basis | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. | Acquisition rate and waveform bandwidth depend on the selected monitor module and system configuration; no cross-model scalar is inferred. |
| quantity_specification | Up to 48 vibration channels per 19-inch rack; optional redundant power and dual Modbus. | Up to three channels and a library of more than 200 monitoring applications. |
| source_repeatability_basis | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. | Verify the complete chain using the installed sensor, gap / mounting condition, channel module and calibration route. |
| source_linearity_basis | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. | Use the configured channel and sensor specifications for measurement uncertainty and protection-loop verification. |
| Status | Active | Active |
| Datasheet | PDF — VC-6000 (opens in a new tab) | PDF — VC-6000 Compact monitor (opens in a new tab) |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
It is a modular machinery-protection system using vibration monitoring. The described rack configuration accommodates up to 48 vibration channels in a 19-inch, 3U rack.
No. Compact is described as a monitor for up to 3 measurement channels. The rack system is a modular configuration with higher channel density. Choose the version for the measurement points and application.
The manufacturer describes Type 7126 software for system configuration and graphical measurement display. Select modules and connections for the sensor type and required measurements.
The overview lists redundant power and dual Modbus as options. Include them explicitly in the ordered configuration when required.
The 7126 plus extension is described for on-demand FFT, Bode and orbit analysis. For trends and continuing diagnostics, assess integration with the appropriate condition-monitoring system.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product