IF2008/PCIE
From the Micro-Epsilon interface and signal-processing accessories series
Micro-Epsilon interface and signal-processing accessories: accessories and system components by Micro-Epsilon for communication adapters.
Visit the Micro-Epsilon site (opens in a new tab)
Technical specification
Every engineering figure, laid out to scan quickly
| source_digital_sensor_channel_count | Sensor connections 1-4 on IF2008/PCIe basis board |
|---|---|
| source_sensor_digital_interface_frequency_limit_hz | input/output frequency max. 5 MHz |
| Current consumption | 500 mA |
| interface_specification | Unknown |
| Encoder channels | 2 |
| source_encoder_supply_voltage_v | Power supply of encoders with +5 V from PCI power supply |
| source_digital_sensor_channel_count_with_expansion | The IF2008E adds sensor connections 5 and 6; total six digital sensors |
| source_fifo_storage | Data stored in FIFO memory for block processing |
| source_host_bus_interface | PCI-Express x1 interface |
| source_interface_module_configuration_notes | IF2008E expansion board: additional two digital controller signals, two analog controller signals, and eight I/O signals; expansion board is mentioned as a component, not a separate catalog identity. |
| source_synchronous_digital_sensor_signals | Four digital sensor signals |
| source_maximum_ambient_temperature_c | +40 °C |
The industries we serve
-
-
Aerospace
- Aircraft door-lock position detection
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
-
Medical industry
-
Environment
-
Electric motor manufacturing
-
Food industry
-
Automotive industry
- Airlines & Aerospace Our balancing machines and moment weighing scales for aerospace drives ensure maximum precision, ease of use, and modular flexibility delivering reliability and performance without compromise contributing to your economic success.
- Automatic balancing machines Automatic balancing machines from Schenck are advanced solutions for precise balancing of rotating components in automated production processes. We offer systems and stations for balancing crankshafts, wheels and tires, turbochargers, electric armatures, drives, axle drive units, torque converters, drive shafts, disc-shaped rotors, as well as fans. Our systems increase productivity, ensure consistent quality, and are tailored to the needs of the automotive, energy, and industrial sectors.
- Axle Drives With our balancing machines for front and rear axle transmissions, the measured unbalance is corrected by drilling into the drive flanges of the transmissions (welding optional). We support you with our interdisciplinary expertise in the production of front and rear axle transmissions from the initial idea to the design stage through to series production.
-
Industrial automation
-
Plastics
-
Optics
-
3D printing
-
Battery manufacturing
Frequently asked questions
Answers to the most common questions about our products and services
It synchronously captures four digital sensor signals and two encoders, using a PCI Express slot in the PC.
Together the boards support six digital sensors, two analog sensors, two encoders and additional I/O. These expanded channels are not a base-card specification.
The card requires a PCI Express slot in the PC. Without a suitable slot, select an external interface matched to the sensors and synchronization needs.
It buffers data so the PC can process it in blocks. This is a buffering and transfer function, not a sensor-accuracy specification.
It supports synchronous sensor and encoder acquisition. Time alignment matters when several channels are used to calculate geometry on a moving part.
Get a quote or advice
Tell us what you need and an engineer will come back to you.
Request a quote for this product